6610: IEC outlet with IDC terminals speeds assembly for power distribution units
Series 6610 is ideal for use in power distribution units and other equipment where multiple outlets are banked in series. Unlike traditional outlets, which require wiring of individual quick connect or solder terminals, the 6610 with IDC technology allows wires to be bussed across the terminals, thereby connecting common terminals all at once. The IDC terminals are arranged either along or across the connector pin axis, allowing for a horizontal or vertical mounting orientation. Wires are pressed into place with the protective back cover. Versions with combination IDC and a quick-connect or solder terminal, for separate wiring of the line connection, are also available.
The 6610 outlet is newly offered with the V-Lock notch intended for use with a mating cordset that latches into the outlet to prevent unintentional disconnection from the power. The outlet is F style according to IEC 60320. The snap-in unit fits panels which have a thickness of bet¬ween 0.8 mm and 3 mm. It is approved by cURus at 15 A at 250 VAC and ENEC at 10 A/250 VAC, and is qualified for applications in accordance with IEC/EN 60950.
- Appliance outlet F style according to IEC 60320 with IDC terminals
- Cross-sections: 12 AWG/2.5 mm2, 14 AWG/1.5 mm2, 1-1.5 mm2
- Snap-in mounting for panel thicknesses 0.8 mm - 3.0 mm
- ENEC and CCC approvals for 10 A/250 VAC, cURus for 15 A/250 VAC
Datasheet 6610 https://www.schurter.com /datasheet/ 6610 0 Datasheet _blank Datasheet 6610-5 https://www.schurter.com /datasheet/ 6610-5 0 Datasheet _blank