KEC  IEC connector C14 with fuse holder 1- or 2-pole Screw-on mounting from front side
IEC connector C14 with fuse holder 1- or 2-pole
Screw-on mounting
from front side
KEC  IEC connector C14 with fuse holder 1- or 2-pole with voltage selector Snap-in mounting from front side
IEC connector C14 with fuse holder 1- or 2-pole
with voltage selector
Snap-in mounting from front side
KEC  IEC connector C14 with fuse holder 1- or 2-pole Screw-on mounting from front side
KEC  IEC connector C14 with fuse holder 1- or 2-pole with voltage selector Snap-in mounting from front side

Series: KEC

IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector

Free Sample Request

48 Variants


Connectors (Inlets/Outlets)

C14
Connector Logo
70° C

Description

  • Panel mount: Screw-on version from front or rear side, snap-in version front side
  • 3 Functions: Appliance Inlet Protection class I, Fuseholder with interchangeable fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm 1  or 2 pole, with or without voltage selector (step switch)
  • Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.
  • Quick connect terminals 4.8 x 0.8 mm

Characteristics

  • Available with or without internal connections
  • The fuse drawer “Fingergrip” can be removed by hand
  • Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

  • Fuse drawer with other voltage values
  • For protection class II
  • Variant with notch for V-Lock mating Cordsets

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Ratings IEC

Ratings IEC


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 60 Hz

Dielectric Strength

Dielectric Strength


Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 3 kVAC between L-N
> 4 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

IP-Protection


The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

IP-Protection


The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals


Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Quick connect terminals 4.8 x 0.8 mm

Panel Thickness S

Panel Thickness S


See details in drawing
Snapper

Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Appliance inlet/-outlet


Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Fuseholder

Fuseholder



1.) fuse holder does not include circuit breakers
2.) Details about fuse-links can be found in the catalog under
FusesDetailed information on the fuse holder and fuse drawers can be found in the general product information.
Fuse drawer

1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6,
for fuse-links 5 x 20 / 6.3 x 32 mm

Rated Power Acceptance @ Ta 23 °C

5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per pole
6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole

Power Acceptance @ Ta > 23°C

Admissible power acceptance at higher ambient temperature see derating curves

Voltage Selector

Voltage Selector


You can refer to different input voltages
Details about the voltage selector can also be found in the general product information
Voltage Selector

optional, step, 2-4 digits

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.


Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.


Approval Reference Type: KEC

Approval Logo Certificates Certification Body Description
Approval marks ENEC_10 VDE Certificate Number: 40046766
Approval marks cURus UL UR File Number: E93617
Approval marks ccc CCC CCC Certificate Number: 2010010204409773


Product standards

Product standards that are referenced

Organization Design Standard Description
Approval marks IEC_Certification_Body Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Approval marks IEC_Certification_Body Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Approval marks UL Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles
Approval marks CSA_Certification_Body Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices


Application standards

Application standards where the product can be used

Organization Design Standard Description
Approval marks IEC_Certification_Body Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements
Approval marks IEC_Certification_Body Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
Approval marks IEC_Certification_Body Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.


Compliances

The product complies with following Guide Lines

Identification Details Initiator Description
Approval marks CE SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
Approval marks Zulassung_Symbol_UKCA SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
Environment_Safety RoHS_Logo_color_CMYK_tif SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
Environment_Safety China_RoHS_e_konform_eps SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
Environment_Safety REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
Components V_Lock_Logo SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
Environment_Safety Glow_Wire_Proof SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.
Environment_Safety Medical SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP)

020050160000001108
LOADING...

Dimensions [mm]

Screw-on mounting

Snap-in mounting


Diagrams

without conn.
Voltage Selector
4-positions, 1-pole
without conn.
Voltage Selector
4-positions, 2-pole
with internal connections
Voltage Selector
4-positions, 1-pole
with internal connections
Voltage Selector
4-positions, 2-pole
Voltage Selector
3 pos.
1-pole
Voltage Selector
3 pos.
2-pole
Voltage Selector
2 pos.
1-pole
Voltage Selector
2 pos.
2-pole
without voltage selector
1-pole
without voltage selector
2-pole

Derating Curves

Fuses
5 x 20 mm (1-pole)
Admissible power acceptance in Watt
Ambient air temperature Ta °C

Fuses
5 x 20 mm (2-pole, per pole)
Admissible power acceptance in Watt per pole
Ambient air temperature Ta °C

Fuses
6.3 x 32 mm (1-pole)
Admissible power acceptance in Watt
Ambient air temperature Ta °C

Fuses
6.3 x 32 mm (2-pole, per pole)
Admissible power acceptance in Watt per pole
Ambient air temperature Ta °C


Short Table of Variants KEC Open complete table KEC

Panel mounting Panel Thickness s [mm] Fuseholder Order Number
Free Sample

Free Sample


Please ask for free sample in order to check if the products meets your requirement for your application.
Send your delivery adress and your specific requirements.

Distributor Stock Check

Distributor Stock Check


The following links refers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner.
The stock availability at the distributors may also be called up separately and the desired product manually entered.
Stock Check Distributor

...
             
 
Snap-in 1.5 1-pole 4303.0032 ...
Snap-in 1.5 1-pole 4303.0092 ...
Snap-in 1.5 1-pole 4303.0212 ...
Snap-in 2 1-pole 4303.0033 ...
Snap-in 2 1-pole 4303.0093 ...
Snap-in 2 1-pole 4303.0213 ...
Snap-in 2.5 1-pole 4303.0034 ...
Snap-in 2.5 1-pole 4303.0094 ...
Snap-in 2.5 1-pole 4303.0214 ...
Snap-in 1.5 1-pole 4303.1032 ...
Snap-in 1.5 1-pole 4303.1092 ...
Snap-in 1.5 1-pole 4303.1212 ...
Snap-in 2 1-pole 4303.1033 ...
Snap-in 2 1-pole 4303.1093 ...
Snap-in 2 1-pole 4303.1213 ...
Snap-in 2.5 1-pole 4303.1034 ...
Snap-in 2.5 1-pole 4303.1094 ...
Snap-in 2.5 1-pole 4303.1214 ...
Snap-in 1.5 2-pole 4303.0002 ...
Snap-in 1.5 2-pole 4303.0062 ...
Snap-in 1.5 2-pole 4303.0182 ...
Snap-in 2 2-pole 4303.0003 ...
Snap-in 2 2-pole 4303.0063 ...
Snap-in 2 2-pole 4303.0183 ...
Snap-in 2.5 2-pole 4303.0004 ...
Snap-in 2.5 2-pole 4303.0064 ...
Snap-in 2.5 2-pole 4303.0184 ...
Snap-in 1.5 2-pole 4303.1002 ...
Snap-in 1.5 2-pole 4303.1062 ...
Snap-in 1.5 2-pole 4303.1182 ...
Snap-in 2 2-pole 4303.1003 ...
Snap-in 2 2-pole 4303.1063 ...
Snap-in 2 2-pole 4303.1183 ...
Snap-in 2.5 2-pole 4303.1004 ...
Snap-in 2.5 2-pole 4303.1064 ...
Snap-in 2.5 2-pole 4303.1184 ...
Screw - 1-pole 4303.0031 ...
Screw - 1-pole 4303.0091 ...
Screw - 1-pole 4303.0211 ...
Screw - 1-pole 4303.1031 ...
Screw - 1-pole 4303.1091 ...
Screw - 1-pole 4303.1211 ...
Screw - 2-pole 4303.0001 ...
Screw - 2-pole 4303.0061 ...
Screw - 2-pole 4303.0181 ...
Screw - 2-pole 4303.1001 ...
Screw - 2-pole 4303.1061 ...
Screw - 2-pole 4303.1181 ...

The fuse drawer is not included and must be ordered separately (see required accessory).

Packaging unit 50 Pcs 

020050160000001108
LOADING...
Alternative: version with line filter (1)

[Swipe to the left and right for more options]

Mating Outlets/Connectors (7)

[Swipe to the left and right for more options]

4787

4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I

5091

IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

Mating Outlets/Connectors shuttered (3)

[Swipe to the left and right for more options]

4783

4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

VAC13KS

VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black

VAC17KS

VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white

Required Accessory (1)

[Swipe to the left and right for more options]

Fusedrawer 3

Fusedrawer for Fuse Links 5x20 mm resp. 6.3x32 mm

Accessories (2)

[Swipe to the left and right for more options]

RC320

Rear Cover for Power Entry Module

Cord retaining kits

Cord retaining strain relief


25.09.2024
   
pl prod Poprzez zmianę wersji katalogu (Pulpit <> Mobile), system resetuje wybrane filtry